davissd
New Member
- Joined
- Feb 3, 2020
- Messages
- 18
After hours trying to connect via the USB port, I finally realized that I have to run the executable "As Administrator". One I learned this, connecting and configuring the unit was easy. After configuring the Wi-Fi Card to station mode and connecting to my wireless network, I created an account on power-datacenter.com and added the serial numbers of the monitored device(my MPP HV LV2424) i was able to start logging data.
Then I noticed the Wi-Fi card stopped sending data. This was caused by connecting via USB again. It seems that it's one of the other but not both.
Just something to keep in mind if you find yourself in the same situation. Now if I want to conencti via USD, I unplug the RS485 cable and then connect the USB to my laptop.
Then I noticed the Wi-Fi card stopped sending data. This was caused by connecting via USB again. It seems that it's one of the other but not both.
Just something to keep in mind if you find yourself in the same situation. Now if I want to conencti via USD, I unplug the RS485 cable and then connect the USB to my laptop.