diy solar

diy solar

My observation of the MPP HV LV 2424 USB and Wifi and SolarPower Software V 1.14SP4

davissd

New Member
Joined
Feb 3, 2020
Messages
18
After hours trying to connect via the USB port, I finally realized that I have to run the executable "As Administrator". One I learned this, connecting and configuring the unit was easy. After configuring the Wi-Fi Card to station mode and connecting to my wireless network, I created an account on power-datacenter.com and added the serial numbers of the monitored device(my MPP HV LV2424) i was able to start logging data.
Then I noticed the Wi-Fi card stopped sending data. This was caused by connecting via USB again. It seems that it's one of the other but not both.
Just something to keep in mind if you find yourself in the same situation. Now if I want to conencti via USD, I unplug the RS485 cable and then connect the USB to my laptop.
 
Yeah, either USB or WiFi box but not both
I am in the same boat as you
 
Thanks for the heads up. I am thinking about getting the wifi adapter so this is good to know.
Cheers!
 
Back
Top