chrisski
Solar Boondocker
- Joined
- Aug 14, 2020
- Messages
- 5,185
I'm getting close to turning on the switch for my 12 volt 1000 watt with 600 watts roof mounted and 400 watts ground mounted PV build.
This is the 400 watt portion. It's:
four 100 watt Lion Energy portable panels hooked in parallel,
The panels are Hooked with Anderson Powerpoles
a Circuit Breaker box with four 10 amp circuit beakers for each panel, a combiner, that will attach to a folding board,
a 6 gauge extension cable (not pictured),
which attaches to 30 amp circuit breaker and finally a 100/30 Victron Charge Controller.
I'll post more later.
This is the 400 watt portion. It's:
four 100 watt Lion Energy portable panels hooked in parallel,
The panels are Hooked with Anderson Powerpoles
a Circuit Breaker box with four 10 amp circuit beakers for each panel, a combiner, that will attach to a folding board,
a 6 gauge extension cable (not pictured),
which attaches to 30 amp circuit breaker and finally a 100/30 Victron Charge Controller.
I'll post more later.