Greg55618688
New Member
- Joined
- Mar 16, 2021
- Messages
- 13
Hello all,
I bought 16 3.2 volt 271 amp CATL batteries from Alibaba for a 24 volt battery bank.
I have a 150/60 Victron MPPT solar charger.
I haven’t installed the batteries yet or performed the initial setup of the MPPT.
I came across a video reporting these are the MPPT settings related to the battery that will need to be completed.
Absorption Voltage:
Float Voltage:
Equalization Voltage:
Re-Bulk Voltage offset:
Absorption Duration: (Adaptive/Fixed)
Maximum Absorption Time:
Tail Current:
Equalization Current Percentage:
Automatic Equalization: (Disabled / Equalize every ____ Days)
Equalization stop mode: (Fixed Time / Automatic on Voltage)
Maximum Equalization Duration:
Temperature Compensation (mV/°C):
Low-Temperature Cutoff (optional):
I asked Alibaba for the recommendations for these settings and they sent back a document that doesn’t contain the information I could identify..
If anyone else has also setup a Victron MPPT using these CATL batteries or similar prismatic EVE, Lishen batteries would anyone want to please share your Victron MPPT setup values for these settings?
Thanks, Greg
I bought 16 3.2 volt 271 amp CATL batteries from Alibaba for a 24 volt battery bank.
I have a 150/60 Victron MPPT solar charger.
I haven’t installed the batteries yet or performed the initial setup of the MPPT.
I came across a video reporting these are the MPPT settings related to the battery that will need to be completed.
Absorption Voltage:
Float Voltage:
Equalization Voltage:
Re-Bulk Voltage offset:
Absorption Duration: (Adaptive/Fixed)
Maximum Absorption Time:
Tail Current:
Equalization Current Percentage:
Automatic Equalization: (Disabled / Equalize every ____ Days)
Equalization stop mode: (Fixed Time / Automatic on Voltage)
Maximum Equalization Duration:
Temperature Compensation (mV/°C):
Low-Temperature Cutoff (optional):
I asked Alibaba for the recommendations for these settings and they sent back a document that doesn’t contain the information I could identify..
If anyone else has also setup a Victron MPPT using these CATL batteries or similar prismatic EVE, Lishen batteries would anyone want to please share your Victron MPPT setup values for these settings?
Thanks, Greg