Hi guys,
I got a 48V 7S-16S 320A BMS
similar to the one on Will's video.
I followed the instructions and hooked up all the wires. Voltmeter on the battery bank read 50.1 V, out from the BMS reads 42 V... I turned the BMS on by using a 18630 battery, the BMS beeped a few times, now the voltmeter read 45 V. I did what Will did, I twist the wires together... but Im slowly loosing voltage and after about 30secs, the BMS shuts off... does anyone have the same problem? does anyone have any suggestions how to get the bms working?
I got a 48V 7S-16S 320A BMS
Smart Lifepo4 li-ion Lipo LTO Battery Protection Board BMS 48V 72V Bluetooth 20S | eBay
You can use 4p wire to connect bms and lcd display. 8S to 20S version : 8S to 20S Li-ion Battery; 8S to 20S Lifepo4 Battery; 8S to 20S LTO Battery. 7-16S Li-ion Battery; 8-16S Lifepo4 Battery; 8-16S Titanium LTO lithium.
www.ebay.com
similar to the one on Will's video.
I followed the instructions and hooked up all the wires. Voltmeter on the battery bank read 50.1 V, out from the BMS reads 42 V... I turned the BMS on by using a 18630 battery, the BMS beeped a few times, now the voltmeter read 45 V. I did what Will did, I twist the wires together... but Im slowly loosing voltage and after about 30secs, the BMS shuts off... does anyone have the same problem? does anyone have any suggestions how to get the bms working?
