TimberWolfe
New Member
- Joined
- Oct 21, 2021
- Messages
- 2
I have an Ecoflow Pro that has a built in smart controller that is both PWM and MPPT. It can accept 25V 12A Max into its system. I have two Sharp Solar Panels - ND240QCJ. The Voc is 37.5 V per panel and the Isc is 8.75 A per panel. 240 Watts each if I am right. I got these to have overhead for cloudy day but am concerned that they are overkill for the Ecoflow and would destroy or damage the expensive unit. Can I still use them both together? Will the Charge Controler handle it, overheat or shut down? Would series be best in this situation as my panels are about 25 feet away from the unit? Lots of questions I know but definately need some help so as not to destroy my potential setup. Thanks for reading and considering.