Hello, I need some help by anyone willing! I bought 4 of the the new Signature Solar EG4-LL 25.6V 200Ah 5120Eh batteries and am having trouble with communication in chain (series). I've connected the wires in daisy chain as the manual shows and set the dip switches accordingly, given #1 is reserved for the Inverter Comm. I can see each individual battery as I connect the RJ45 directly to each battery, the problem is the software will not show all 4 batteries simultaneously as show in similiar videos. Any advice? My guess is that the dip switches are not correct as the manual for the 24v batteries at the part of dip switch settings says ("48v settings). lve tried a different computer, triple checked settings, switches, cables but no luck seeing all 4 batteries in chain displayed simultaneously, only 1 battery at a time being shown (pack16). My concern is that the Inverter BMS won't be able to read all 4 batteries correctly. My inverters are 2 Growatt SPF 3000TL LVM-ES running in split phase. Heres some photos of my problem, setup and manual. Thanks