I imbuere New Member Joined Oct 2, 2020 Messages 59 Jan 8, 2022 #1 The junction boxes seem to not be fully sealed. Is this a problem? I can still exchange them, but I bought 6 and all buy one have this issue.
The junction boxes seem to not be fully sealed. Is this a problem? I can still exchange them, but I bought 6 and all buy one have this issue.
HRTKD Boondocker Staff member Moderator Joined Apr 24, 2020 Messages 9,965 Location Somewhere South of Denver Jan 9, 2022 #2 If I'm looking at the picture right, it looks like the box was placed on the panel before the backing material.
If I'm looking at the picture right, it looks like the box was placed on the panel before the backing material.
I imbuere New Member Joined Oct 2, 2020 Messages 59 Jan 10, 2022 #3 HRTKD said: If I'm looking at the picture right, it looks like the box was placed on the panel before the backing material. Click to expand... No, it looks to me that they didnt add enough sealant. It “squished” through in some places, but not others.
HRTKD said: If I'm looking at the picture right, it looks like the box was placed on the panel before the backing material. Click to expand... No, it looks to me that they didnt add enough sealant. It “squished” through in some places, but not others.
GeorgiaOnSitePower New Member Joined Dec 19, 2020 Messages 8 Jan 10, 2022 #4 imbuere said: No, it looks to me that they didnt add enough sealant. It “squished” through in some places, but not others. Click to expand... Yep I would go out and buy some good sealant and finish the job the factory didn't accomplish. Way to much time and trouble for a return.
imbuere said: No, it looks to me that they didnt add enough sealant. It “squished” through in some places, but not others. Click to expand... Yep I would go out and buy some good sealant and finish the job the factory didn't accomplish. Way to much time and trouble for a return.
CrazyWabbit New Member Joined Dec 25, 2021 Messages 21 Jan 20, 2022 #5 it is fine, they obviously don't require 100 squeeze out or it wouldn't have passed QC. the electrical leads pass thru the middle of the junction box, there is plenty of bond area from the edge to the pass thur.
it is fine, they obviously don't require 100 squeeze out or it wouldn't have passed QC. the electrical leads pass thru the middle of the junction box, there is plenty of bond area from the edge to the pass thur.