Bear_Ridge
New Member
- Joined
- Mar 13, 2021
- Messages
- 1
Hi all, ??
I am new here, but have been watching the diy solar YouTube channel for a while now.
I am a cabinet maker and fitter and often work on site where there may be no mains power or running cables from an outlet to your tools is not permitted due to UK health & Safety risks.?
Therefore I intend to build a solar system for my work van to charge 2 or 3 power hubs with 240v and 110v inverters, all contained within festool systainer system boxes.??
I would very much appreciate your views on this project,
Link for Power Hub below:
https://www.festool.co.uk/products/...lity-and-organisation/200234---sys-ph-gb-240v
Thank you in advance for your help, advice and guidance ?
Stephan
I am new here, but have been watching the diy solar YouTube channel for a while now.
I am a cabinet maker and fitter and often work on site where there may be no mains power or running cables from an outlet to your tools is not permitted due to UK health & Safety risks.?
Therefore I intend to build a solar system for my work van to charge 2 or 3 power hubs with 240v and 110v inverters, all contained within festool systainer system boxes.??
I would very much appreciate your views on this project,
- any issues you see potentially occurring,
- anything to consider,
- how you would go about it
- or even if someone has already seen it done or done it themselves.
Link for Power Hub below:
https://www.festool.co.uk/products/...lity-and-organisation/200234---sys-ph-gb-240v
Thank you in advance for your help, advice and guidance ?
Stephan