Cosmini
New Member
- Joined
- Oct 30, 2021
- Messages
- 55
hello folks, newbie here,
I originally purchased a Renogy 200W Mobile solar panel which is working flawlessly with my Victron SCC 100V/30A outputting 180-205W.
I then bought two 200W Newpowa solar panels (non-mobile).
Both of the NewPowa panels, when connected by themselves output 17+V, but no amps whatsoever (0 amps).
When I connect them in series, according to the Victron SCC output 28V and190W combined (at top sun). This leads me to believe that they are 100W panels, but not sure why they do not work by themselves. Has anyone seen this kind of behavior? -- so far, crickets from the support company. (I've attached screenshots of the two in series, and one, standalone)
thank you kindly for any thoughts,
Cosmin
I originally purchased a Renogy 200W Mobile solar panel which is working flawlessly with my Victron SCC 100V/30A outputting 180-205W.
I then bought two 200W Newpowa solar panels (non-mobile).
Both of the NewPowa panels, when connected by themselves output 17+V, but no amps whatsoever (0 amps).
When I connect them in series, according to the Victron SCC output 28V and190W combined (at top sun). This leads me to believe that they are 100W panels, but not sure why they do not work by themselves. Has anyone seen this kind of behavior? -- so far, crickets from the support company. (I've attached screenshots of the two in series, and one, standalone)
thank you kindly for any thoughts,
Cosmin
Attachments
Last edited: