boondox
Chief Engineer, RedNeckTech Industries
- Joined
- Mar 1, 2020
- Messages
- 788
Sorry about the title. I couldn't resist. Member @D. Abineri sent me a PM the other day asking about my angle iron solar panel rack and I said I would send some pics. I figured I'd put it here in case it is of interest to anyone else.
I built and assembled the rack. I made all the brackets and whatnot. Then I took it apart and put number stamps on it as I did. This is because not all the bolt hole and so on are identical. Then I drove it over to a powder coating outfit. They sandblasted and powder coated it. It is standing the test of time very well. I am very glad that I went with powder coat over paint. It still looks like it did when new, now 12 years or so.
I built and assembled the rack. I made all the brackets and whatnot. Then I took it apart and put number stamps on it as I did. This is because not all the bolt hole and so on are identical. Then I drove it over to a powder coating outfit. They sandblasted and powder coated it. It is standing the test of time very well. I am very glad that I went with powder coat over paint. It still looks like it did when new, now 12 years or so.
