diy solar

diy solar

Off Grid System, Questions!

You were right, the display shows 5w but it’s drawing 2 amps @ 50+ volts!

ETA: it was late, I didn’t realize I had some stuff plugged in. But the displayed values aren’t accurate.
 
Last edited:
Yeah, no problem.

Sorry for the confusion, I’m new to solar so I just assumed the display readings were accurate because the BMS was functioning correctly lol.

Learning all the time on here! Thanks for dialing me in, I appreciate it.
 
Is there any way to program these inverters to activate the generator relay, when the load is is too much for the inverter/batteries/ solar?
At this point, I can only trigger the relay via battery voltage.
 
Is there any way to program these inverters to activate the generator relay, when the load is is too much for the inverter/batteries/ solar?
At this point, I can only trigger the relay via battery voltage.

To my knowledge the only inverter that might be capable of this is Victron with a custom assistant. In any case, the likelihood of this occurring without service disruption is zero.
 
Back
Top