One Cable CT clamp to provide 2 readings?

[IrishAL_0]

Ok so this is probably an easy one for some…can i use one ac cable clamp and split the output to 2 devices - my hybrid converter and to my EV smart charger?

I’m currently installing an EV charger. It comes with its own clamp. I already have a PV system and battery with hybrid inverter. It has its clamp at the incoming mains. I can splice into it near the EV charger but I’m thinking that doing so will halve the reading.

Thanks for helping.

 

[kommando]

CT clamps have their own specs to match the equipments requirements so even if possible the chance of your converter and ev charger using the exact same spec CT is remote.