Hey all! I learned a lot since my first proposed Electrical Diagram. If anyone could take a look at my second version, which is quite different, I'd be beyond grateful.
This is a 12V system with 3.6-4.8kw battery bank (300-400aH), 2000 watt inverter, DC-DC alternator charging, and 620 watts of solar.
A few questions I have regarding the diagram:
This is a 12V system with 3.6-4.8kw battery bank (300-400aH), 2000 watt inverter, DC-DC alternator charging, and 620 watts of solar.
A few questions I have regarding the diagram:
- Is the battery bank fuse size both in the positive bus bar and near the bank adequately sized? Will the 300A Master disconnect switch be adequate as well?
- I have a TON of DC load fuses (I've listed all of the potential AC/DC loads in the diagram.) I'm guessing I can wire some of the DC loads together so that they are not individually fused but is that correct?
- Will the way I want to connect the battery bank Anderson connectors work?
- Would you add an additional resettable fuses for the AC breaker box? Or additional resettable fuses anywhere else so I don't waste the ANL + busbar ones? (ANLs could potentially be backups.)