Post Battery Bank and Inverter! (pictures only)

[Jim_in_Sav]

Don't laugh.

 

[antdun]

 

[antdun]

 

[Bad Randy]

39X395W

 

[ericfx1984]

Not done yet... But soon to be playing with the big boys

 

[Videotec2000]

Commissioned in April.
EG4 Rocks!!!!

 

[labeeman]

 

[HRTKD]

Go ahead, post text. It will be deleted. Follow the guidelines of the thread or suffer the consequences.

 

[labeeman]

Bee box battery.

 

[Batronca]

22kpv
2 Deye 8k
80kwh Samsung SDI battery.
Was built from 2020.

 

[RichSolar268]

DIY setup, 6000XP installed March 2024 running 100% off-grid (grid as backup if needed)


Battery Bank and EG4 rack


10.1" Touch screen connected to Raspberry pi running solar assistant

2 hours ago I pulled down the 6000XP and put this up instead.....

 

[Spunky]

 

[Daddy Tanuki]

Not the neatest, but fully functional. given some more time and I will be able to clean up some of the more spurious wiring. also need ot find a better way to deal with mounting fo the BMS(s)

 

[HughF]

31kWh of Seplos with Eve and envision cells. 3.6kW Sunsynk (about to swap in an 8)

This replaces an outback vfx3048 system we’ve had for the last 15yrs, originally on wet nicads then on a diy’d LFP pack with batrium.

 

[knexbuilder]

 

[Mattb4]

No text.

 

[ConnerLabs]

Tiny 12v system built for my shipping container workshop. 100Ah AGM battery and 1kW budget Chinese inverter. 135W flexible panel stuck to roof with magnets. This has been in operation for 18 months now running LED lighting and some smaller power tools.

 

[K-fab]

48V system using two 5000 PowMr inverters and 16 314Ah Eve LiFePo4 batteries to power my 20K BTU multi head min-split HVAC system.
Feeding it from a 20 panel 230W PV array. 10 PV in series, 2 banks run to the inverters in parallel. The inverters can't handle 20 PV in series voltage.
Still have to hook up the 120VAC aspect from the fuse panel to the inverters and then the inverters to the compressor. I'm using each inverter as a leg to power the 240VAC split phase compressor.

I've also installed an EG4 mini-split that's running off of 9 PV. I still have to get them mounted and wired up.

 

[kromc5]

68kw ground mounted, 8-4p16s total 576kWh.
2 - 12kw growatts, 3 - 18kpv, 4 - Victron 450/200, 1 - 450/100

 

[Sniper-X]

RUiXU Lithi2-16 + EG4 12kpv + 6kw PV​

Upgrading from my 6.5kw Orient Power Single Phase inverter..... (it has served me well....) Now installing the EG4 12kpv, while building custom ground mount to hold 2 arrays, 8 Panels each array..... and finally pulled the trigger on 2 RUiXU Lithi2-16 Outdoor Batteries. Installation video's coming soon..... In the Caribbean, 268 Representing!

 

[copec]

Mine still looks the same now (minus any cryptocoin mining rigs). I built a battery from 63 G1 Nissan Leaf modules that I harvested from whole batteries in 2017 and eventually put a Nuvation BMS on it. I got a pallet of 36 used 72 cell solar panels from SanTan Solar around the same time. I used an MPPSolar 5kw split phase for a while, backup circuits where on it, and then I had two 1kw grid-tie inverters with limiters that supplemented the rest of the house. That whole setup worked great but for some reason I couldn't leave it alone and I went to a Growatt 12kW low-frequency inverter and then a Deye 8kW in 2020. I do zero-export with the grid and use the battery as a buffer but let it rest at 50% SoC every night for backup power. I sort of want to redue the whole thing at this point but can't justify the expenditure. I accomplished my goal of having backup power because I work from home, and supplementing the power bill because of AC use living outside of Vegas.

 

[blokl]

Let's try this out. Take a quick picture or 5 of your current battery and system and share it here!

Let's keep all posts focused on pictures only. If you like a system, give it a thumbs up but don't reply!

Let's see if we can pull this off!

Happy with my Gobel batteries. They will replace the Tesla and the Pylontech.

 

[TAC40]

Current project

 

[saggys]

Cabin and bunkhouse systems.

 

[Q-Dog]

In the shed.