WorldwideDave
Solar Wizard
Older Quattro 48/5000/70-2x100 120v 2753 (Quattro 48/5000/70-100/100 120V) w/dual AC inputs and an integrated transfer switch. Firmware v556 (latest). Not UL listed device, installed in USA. Connected to grid & single 48v battery for testing. Also have Cerbo GX and MPPT 250/70, both with latest firmware.
In VRM, with Quattro on, the icon in the middle for the quattro/inverter/charger reads "Float". Yet my solar charge controller reads Absorption. Battery showing idle at 100% SOC, 56.77V.
Why is the quattro reporting one thing, and the SCC/MPPT reporting something different?
How is the quattro determining things - it is not a smart BMS, so guessing it is looking at its own battery terminals, it knows that it is connected to a lifepo4 battery that has been configured in the shunt/MPPT, and based on voltage figures out that it should be in float by now?
MPPT is setup with lifepo4 smart lithium profile.
In VRM, with Quattro on, the icon in the middle for the quattro/inverter/charger reads "Float". Yet my solar charge controller reads Absorption. Battery showing idle at 100% SOC, 56.77V.
Why is the quattro reporting one thing, and the SCC/MPPT reporting something different?
How is the quattro determining things - it is not a smart BMS, so guessing it is looking at its own battery terminals, it knows that it is connected to a lifepo4 battery that has been configured in the shunt/MPPT, and based on voltage figures out that it should be in float by now?
MPPT is setup with lifepo4 smart lithium profile.
