My wife and I live on the road full time and are going to pick up our new RV in California and then drive to pick up the MPP and panels and install them. I need to order all the small stuff to a friends house to make sure it's there and ready to go when we arrive.
MPP HYBRID LV2424 2.4kw
370 Watt or 390 Watt panels x 2
*Wired in parallel. I'm open to hear specific examples of why these should be put in series. I have my current RV in parallel do to shading as we move around being full timers. The MPP will take up to 145V so series or parallel is fine.
SoK 12v 206ah Lithium batteries wired in Series for 24v
Ampper battery cut off switch
24V to 12V Buck Converter - uxcell New BIG-Size Converter DC 24V 12V 40A 480W
PV Breaker - ANJOSHI 30 Amp Circuit Breaker
Red/Black 250amp Bussbars
***on a 24v system pretty sure I only need half of this but this is what I could find, any reason not to go this high?
Battery Fuse - Windy Nation 150amp ANL Fuse
Battery Monitor - LNEX with Shunt, 500A
10awg PV wire (Panels will be 15' max from MPP)
1/0 Battery cable (batteries will be 1'-2' from MPP)
Raised solar brackets
*** Looks like I might have to build something out of L brackets and flat aluminum as I won't know if the panels will actually fit until I pick up the RV. The people we are buying it from are to old to get on the roof and the factory says I have 39"-40" width in the place I am looking at putting them and the panels are 39" wide. Any insight, thoughts, or ideas here would be great.
Did I miss anything?
Any of the components a no go? I got most of them of @Will Prowse site.
Thanks in advance to anyone who takes a look.
MPP HYBRID LV2424 2.4kw
370 Watt or 390 Watt panels x 2
*Wired in parallel. I'm open to hear specific examples of why these should be put in series. I have my current RV in parallel do to shading as we move around being full timers. The MPP will take up to 145V so series or parallel is fine.
SoK 12v 206ah Lithium batteries wired in Series for 24v
Ampper battery cut off switch
24V to 12V Buck Converter - uxcell New BIG-Size Converter DC 24V 12V 40A 480W
PV Breaker - ANJOSHI 30 Amp Circuit Breaker
Red/Black 250amp Bussbars
***on a 24v system pretty sure I only need half of this but this is what I could find, any reason not to go this high?
Battery Fuse - Windy Nation 150amp ANL Fuse
Battery Monitor - LNEX with Shunt, 500A
10awg PV wire (Panels will be 15' max from MPP)
1/0 Battery cable (batteries will be 1'-2' from MPP)
Raised solar brackets
*** Looks like I might have to build something out of L brackets and flat aluminum as I won't know if the panels will actually fit until I pick up the RV. The people we are buying it from are to old to get on the roof and the factory says I have 39"-40" width in the place I am looking at putting them and the panels are 39" wide. Any insight, thoughts, or ideas here would be great.
Did I miss anything?
Any of the components a no go? I got most of them of @Will Prowse site.
Thanks in advance to anyone who takes a look.