Renogy LifePO4 Smart Battery Charge Parameters / MT50

[mnsprinter170]

I received the charging parameters from Renogy for me to enter into my MT50. I just wanted to get people's opinions on their suggestions?
I know Will mentioned he would set Battle Born's float charge to 13.6v. Renogy mentions 14.4v.......


Over voltage disconnect voltage 16.0v
Charging limit voltage 16.0v
Over voltage reconnect voltage 15.0v
Equalize charging voltage 14.4v
Boost charging voltage 14.4v
Float charging voltage 14.4v
Boost reconnect charging voltage 13.2v
Equalize duration 0 minutes
Boost duration 120 minutes

 

[andresleon]

Came to ask the same question. I used Will's video (

) to configure my mppt controller for 3 renogy 100Ah lifeop4 batteries. The only difference I made was the battery Ah, which I set to 300.

 

[mnsprinter170]

I would tend to believe Will as well, but I am going to use the settings Renogy sent me (above).