Hi guys, new here.
I have a renogy rover Li 40amp controller running through renogy battery monitor to 2 x 200ah lithium batteries. 3x 300w solar panels in series on RV roof.
I am getting approx 52volts and 11amps coming into controller at moment (550watts approx) my battery is at 13.2volts and my monitor is reading + 8.6amps and 113watts going to battery.
Shouldn't I punching Max amount into battery ? It seems like my controller is only trickle charging.
No help/reply from renogy yet.
Has anyone got any ideas
My controller is set to lithium and is showing mppt on the charge, I have tried user mode (no difference) and also turning off, disconnecting and no difference.
By the way I'm in full sun on cool morning (15c)
Cheers,
Corey
I have a renogy rover Li 40amp controller running through renogy battery monitor to 2 x 200ah lithium batteries. 3x 300w solar panels in series on RV roof.
I am getting approx 52volts and 11amps coming into controller at moment (550watts approx) my battery is at 13.2volts and my monitor is reading + 8.6amps and 113watts going to battery.
Shouldn't I punching Max amount into battery ? It seems like my controller is only trickle charging.
No help/reply from renogy yet.
Has anyone got any ideas
My controller is set to lithium and is showing mppt on the charge, I have tried user mode (no difference) and also turning off, disconnecting and no difference.
By the way I'm in full sun on cool morning (15c)
Cheers,
Corey