I have signature solar’s server rack case along with six life power four batteries I am wanting to hook up 2 Ruixu wall mount batteries to the server rack case busbar. From what I understand the server rack case busbar has a 600 amp capacity. I am planning on having the wall mount batteries sit on each side of the server rack case call Michael. Not sure yet if I’m going to drill a hole in the side of the case for the cables or enter through the top poles that are already there. Has anybody attempted this configuration? If so, let me know if there’s any problems. The reason why I’m going to try this configuration is it will be the easiest configurations without having to buy an extra busbar for all batteries, then the shunt, then to the inverter. I already have the shunt hooked up, and if I could just add the batteries to the server rack, bus bar, it would be easiest. Here’s a quick picture of my set up. It’s from a video I posted earlier. Other than that the system is great. I’ve got 30 MW produced so far.
Ruixu Wall mount battery hooked up to EG4 Server rack case busbar
- Thread starter Steve16r
- Start date
Similar threads
