Refinished
Shocked and Amused
Has anyone figured out the full logic that drives the 'on' and 'off' of the SBMS0 EXTIOx on this BMS? Specifically, I am interested in the Type 1 (HVD) and 2 (LVD) conditions. The other types seem straight forward.
I dived into the source code, which seems well organized, but I was not able to answer my own question. Dacian's comments on his own board give clues though I have not been able to piece it all together. The state of CFET and DFET play a role, but it seems there are other conditions, probably using the flags on the status page, that drive the EXT IOs.
Basically, I am trying to understand the relationship between the values in Advanced Parameter Settings, any static thresholds, and the effect on Type 1 and Type 2 EXT IOs.
@FilterGuy, I noticed that you were active in discussions with Dacian on this topic. Did you figure this out? Thanks!
I dived into the source code, which seems well organized, but I was not able to answer my own question. Dacian's comments on his own board give clues though I have not been able to piece it all together. The state of CFET and DFET play a role, but it seems there are other conditions, probably using the flags on the status page, that drive the EXT IOs.
Basically, I am trying to understand the relationship between the values in Advanced Parameter Settings, any static thresholds, and the effect on Type 1 and Type 2 EXT IOs.
@FilterGuy, I noticed that you were active in discussions with Dacian on this topic. Did you figure this out? Thanks!