rafrojack
New Member
- Joined
- Sep 23, 2019
- Messages
- 28
Hi all,
I know there are a lot of fuses & switches but I enjoy the option of being able to T/S easily without having to repeatedly remove/install connections. Any insight would be very much appreciated. Thanks.
◦All calculations for wire sizes were made in accordance with ABYC E-11 Table VI A-E & Table IX.
◦Assumptions for wiring chart:
•All wiring will be rated at 105°C
•Copper Stranded Conductors/Flexible Cables
•Temperatures are for INSIDE an Engine Room
•Voltage Drops are at 3%
•Wire is rated for AT LEAST 125% above max amp draw
•Both POS+ & NEG- cables will be the same awg
Lengths in schematic are for entire circuits
◦
I know there are a lot of fuses & switches but I enjoy the option of being able to T/S easily without having to repeatedly remove/install connections. Any insight would be very much appreciated. Thanks.
◦All calculations for wire sizes were made in accordance with ABYC E-11 Table VI A-E & Table IX.
◦Assumptions for wiring chart:
•All wiring will be rated at 105°C
•Copper Stranded Conductors/Flexible Cables
•Temperatures are for INSIDE an Engine Room
•Voltage Drops are at 3%
•Wire is rated for AT LEAST 125% above max amp draw
•Both POS+ & NEG- cables will be the same awg
Lengths in schematic are for entire circuits
◦