lexio
feel the balance 3.65
\
firmwares for those things
firmwares for those things
Last edited:
thanks for the links!\
firmwares for those things
it is both canbus and rs485, but only rs485;is enabled on the inverterso if i understand it right the bms port is a sr 485 port. or is it not used at all
rs485...but rs485 is a physical layer
RS-485 does not define a communication protocol
so i think you cant communicate over that port at all never
so even if you ask seplos to change to rs485 they cant do it hopefully i am wrong
see
https://en.wikipedia.org/wiki/RS-485 ===> hardware connection
and the communication protocol
https://en.wikipedia.org/wiki/CAN_bus ===> software portion
ask MPP Solar what the communication protocol is on that port
@Seplos Chris Ren i will buy 2x 16s right away. Im desperately looking for a solution right now.@Seplos Chris Ren, are you taking note of these requests? I will have 6 of your BMS's once they finally show up, and myself and many others would appreciate comms with MPP Solar. Please advise.
Yes, one terminal cannot carry enough current. You're supposed to connected all the terminals with P+,P-Just noticed this oddity on their wiring diagram. Anybody know what to make of this? Do they want me to connect the positive to more than one of the terminals for some reason?
View attachment 54510
Physically, the board looks like this:
View attachment 54511
Are they worried that one of the lugs can't carry enough current through the board?
The 7200max is what MPP rebranded as the LV6548 correct? I know MPP derated it for some reason, but dunno why.thanks for the links!
, unfortunatly voltronics simple hasnt made this available in any of their firmware, because they consider it "reserved"
Also , my inverters ( 8000MAX ) don't seem to have any new firmware avail. , unlike the 7200max
i dont think it is, as the max series only came out as 230v single fase, but i could be wrong hereThe 7200max is what MPP rebranded as the LV6548 correct? I know MPP derated it for some reason, but dunno why.
thanks houseoffancients. That helps a lot. Been looking everywhere and now I have some task tomorrow.Battery Monitor - Google Drive
drive.google.com
the manual is there too, as is the manual for the rs485 usb to serial connection
I cant get any of these files to run? I can open them but the .exe files will not run. I am using Windows 10. Any ideas or is there another link somewhere. Thxs.Battery Monitor - Google Drive
drive.google.com
the manual is there too, as is the manual for the rs485 usb to serial connection
Any errors? Try to right click and run as admin.I cant get any of these files to run? I can open them but the .exe files will not run. I am using Windows 10. Any ideas or is there another link somewhere. Thxs.
running them perfectly fine om my windows 7, 10 and 11 betaI cant get any of these files to run? I can open them but the .exe files will not run. I am using Windows 10. Any ideas or is there another link somewhere. Thxs.