Settings for Renogy rover?

[Antonio cianciardo]

I have 400w solar in serie, Renogy rover 40amp mppt, a 200ah diy lifepo with a overkill bms 4s. I don’t know what settings to used with my rover 40amp mppt. Please help. Now I’m waiting for more cells from AliExpress to add Another 200 ah with the bms. This is for a travel trailer. Also tips for the bms settings
Thanks

 

[Antonio cianciardo]

I have 400w solar in serie, Renogy rover 40amp mppt, a 200ah diy lifepo with a overkill bms 4s. I don’t know what settings to used with my rover 40amp mppt. Please help. Now I’m waiting for more cells from AliExpress to add Another 200 ah with the bms. This is for a travel trailer. Also tips for the bms settings
Thanks

Please I need some help with the setting of my mppt ( Renogy rover 40) I have 2 12V lifepo4 200ah Diy . I can’t find any good settings for my Renogy mppt .
High volt disconnect
Charge limit volt
Equalize charge volt
Boost charge volt
Float charge volt
Boost charge return volt
Over disconnect return volt
Low voltage alarm
Over discharge volt
Discharge limit volt
Over disc delay time
Equalize charge time
Boost charge time
Equalize charge interval

 

[joeExotic]

Sometimes when I ask "Anybody" to help. Anybody will help. Anybody is very helpful. Just ask "Anybody". He will help. Hope this helps.

 

[Keroc]

Not sure if you ever got your answer, but if you did please post the solution. I have Rover 40 with
prebuilt 12v 100Ahr lifepo4 that has an internal BMS. The default settings in R40 for the Li battery type aren't compatable with my battery so I thought I'd program the user battery type instead. Bad news is I have to wait to get my BT-1 module before I can program the R40.
@joeExotic Yeah, big help, thanks!