diy solar

diy solar

Small torque wrench - .75 Nm?

JimF

New Member
Joined
Nov 10, 2019
Messages
14
Newbi here. I just bought a Victron 75/15 SmartSolar MPPT controller to connect 200 watts (2 x 100watt 12v Renogy) to a 100AH 12v SOK Lithium battery. The Victron manual does not mention using a ferrule, however it does state to use “.75 Nm” to tighten the terminals. Anyone know of a screwdriver torque wrench that can measure down that low?

thanks!
 
Back
Top