So new it hurts

[Edpritt]

Will this work? Any suggestions on setting up?


Panel Specification (x4)

Maximum power(Pmax) :200W

Output tolerance : ± 3%

Maximum system voltage :700V DC

Tolerance: +/-5%

SLA Battery Voltage: 16V

Type of Solar Cell: Monocrystalline

Open Circuit Voltage(Voc): 19.2V

Maximum Ystem Voltage: 16V

Temperate Coefficient of Isc: (010+/- 0.01 ) %/C

Temperate Coefficient of Voc: - (0.38 +/-0.01 ) %/C

Temperate Coefficient of Power Voc: -0.47%/C

Temperature Range: -20 ℃ to +80 ℃

Connector: MC4



see attached for the controller/charger/inverter

Batteries (x4)

Specifications

Rated Capacity (0.2C): 300Ah / 3840Wh
Cycle life: > 2000 cycles at 100% Depth of Discharge (DoD),
up to 5000 cycles at 80% DoD
Rated voltage: 12.8V
Charge voltage: 14.4 - 14.6V
Depth of Discharge (DoD): 100%
Standard charge current: 50A
Charging time: Approximately 7 hours
Max continuous charge current: 100A
Max continuous discharge current: 200A
Peak discharge current: 400A (Duration: less than 5 seconds)
Operating temperatures: Charge 0°C~50°C,
Discharge -20°C~60°C, Storage -20°C~50°C
Impedance: ≤ 15mΩ

 

[uptopsolar]

Curious, what's the model of the modules you got? Do you have that information? By set-up do you mean like if they will work well together and how to configure it?