diy solar

diy solar

*SOLD* Ganfeng 277ah cells / JBD 150a BMS / cases (WA state)

memilanuk

New Member
Joined
Apr 21, 2021
Messages
125
What I have...

Eight (8) New true grade A Ganfeng 277ah cells. These should test 285ah to 290ah (according to the upstream seller) and are all from a batch manufactured on 5-30-21. A factory test report (of a representative sample, not these particular cells) is available. $1,265.91 total shipped. I did have them hooked up to a 30v 10A DC benchtop power supply, four cells in parallel at a time, charging @ 3.5v 9.5A, so they are (were) up to ~3.4 v (as opposed to 3.26v, which is how I received them).

IMG_20220519_064920177.jpg

Two (2) ABS Battery Box for EVE, LISHEN or CATL 271 – 310AH Prismatic Cells $119.99 each - https://solarsupplyhouse.com/product/abs-battery-box-for-lishen-272ah-or-eve-280ah-prismatic-cells/
IMG_20220519_064839500.jpg

Two (2) JBD 12V 4S 150A BMS @ $125 each - https://www.currentconnected.com/product/jbd/

This includes cell balance wiring harness, temperature sensors, bluetooth transmitter board, etc. etc.

Two (2) #6 AWG 12" 'Y' cable for above BMS @ $18 each - https://www.currentconnected.com/product/jbd-y/
IMG_20220519_064733554.jpg

Total cost:

Cells (8) $1287
BMS (2) $250
Y-cables (2) $36
Cases (2) $238
Total $1811

Asking $1500 for the whole shebang, ready to go. Shipping negotiable. May consider parting out, but I would prefer to sell it all and be done.
 
I'm thinking on it. I have to think of a "need" so as to warrant the "cost".
 
Back
Top