I have a Titan Solar Generator with three of their batteries attached. I decided on a HSKY ELITE 24V battery for additional storage capacity. I didn’t give enough consideration as to mating the two together, as they are both 24V systems, charge at the same rate, etc. The battery is in shipment mode and as I ponder its setup, I realized the Titan uses a red SB50 connection and the HSKY uses a grey SB175 connection. Any suggestions as to how I can connect the two after they are all charged up. Of course, I planned on using the Titan battery charger, as it charges at the same 29.2V (if my memory serves me). So, any sources for purchasing such a ‘transitional’ cable or making one myself? Thanks so much for any guidance provided.