Top balancing problems?

[John Frum]

Thanks
I was wondering about that.
Leaving them on a charger too long even when I have the charge set to 3.65

Is there a question there?

 

[badankle]

No , thanks for your support
I have much to learn
My fear is frying the battery cells or BMS because of lack of knowledge. I am about to try and figure out the setting on a BMS. For a newbie this is a intimidating task
Great site

 

[John Frum]

No , thanks for your support
I have much to learn
My fear is frying the battery cells or BMS because of lack of knowledge. I am about to try and figure out the setting on a BMS. For a newbie this is a intimidating task
Great site

We are here to help.
Congratulations, you have already made it through the first trial.

 

[badankle]

We are here to help.
Congratulations, you have already made it through the first trial.

Thanks smooth
Got another question about Daly Chargers ??
Can you confirm something for me
My Daly BMS is showing my battery 100% SOC
But I can not change the SOC settings to 80 % ( the charge rate is already set to 100 % )
Do I have to wait until the SOC drops below 80% to set it ?
Sorry I might be asking the question in the wrong way ,, put I am trying
Thanks again

 

[John Frum]

Can you confirm something for me
My Daly BMS is showing my battery 100% SOC
But I can not change the SOC settings to 80 % ( the charge rate is already set to 100 % )
Do I have to wait until the SOC drops below 80% to set it ?

I'm not familiar with the Daly BMS.
If it has a button to reset capacity, you can hit reset after you charge the battery.
If it doesn't it will likely take a cycle or 2 to get accurate.

 

[badankle]

I'm not familiar with the Daly BMS.
If it has a button to reset capacity, you can hit reset after you charge the battery.
If it doesn't it will likely take a cycle or 2 to get accurate.

Yes it has a reset button but I think I will take your second answer. I don’t like the sounds of reset ?
Thanks again ,, !!
the learning continues