Torque numbers for Mobil systems

[richard cabesa]

So I have built my RV system over the last four years and it has performed quite well, six Battleborn, 2000 watt inverter/charger and 1300 watts charging. We are leaving on a two month overland type trip shortly and I want to run through all my electrical connections.

no torque wrench used in my original assembly. Just tighten the crap on everything. I would like to be more specific on these “crap” numbers for this tune up before this trip.

where do I find the torque numbers for 1/4”-5/16”-3/8” buss/breaker/battery type connections?

thanks peeps

 

[HRTKD]

While there are common torque numbers for certain fastener sizes, I would be looking for torque settings from the manufacturer or each device.

 

[wme]

"Universal " torque settings for farmer grade (2) bolts (no markings)
1/4" 5 ft lbs
5/16" 11 ft lbs
3/8" 20 ft lbs
Most ft lbs torque wrenches are not real accurate at these low numbers an in lb wrench would be much better

 

[richard cabesa]

I have a SnapOn inch pound wrench

 

[time2roll]

Never had an issue. Bring an adjustable wrench and a pair of pliers and no worries.

 

[wme]

Never had an issue. Bring an adjustable wrench and a pair of pliers and no worries.

No, no never pliers, Vice Grips