vdub
New Member
- Joined
- May 31, 2021
- Messages
- 30
I have an EP Ever Tracer 6415AN MPPT solar panel controller. I searched everywhere for the proper settings for the user parameters for Battle Born batteries and came up empty handed. Finally, I sent the parameters to Battle Born and they came back with the settings below.
Battle Born is a terrific company to work with -- they are knowledgeable, very nice and quick to help. I spent a little extra to get Battle Borns, but I'm glad I did. Well worth the money. Maybe these settings will help someone else -- I suspect they are good for any Tracer with a 12v system. vw
Over Voltage Disconnect – 14.7V
Charging Limit Voltage -- 14.7V
Over Voltage Reconnect Voltage -- 14.6V
Equalize Charging Voltage -- 14.6V
Boost Charging Voltage – 14.6V
Float Charging Voltage – 13.6V
Boost Reconnect Charging Voltage 13.2V (this is the voltage that will trigger the boost mode to kick in. 13.2V is ~70%, raise this if you don’t want them to get that low before recharging, do not set below 12.5V [14%])
Low Voltage Reconnect Voltage – 11V
Under Voltage Warning Reconnect Voltage -- 12.4V
Under Voltage Warning Voltage -- 12.3V
Low Voltage Disconnect Voltage – 12.1V
Discharging Limit Voltage – 11.5V
Equalize Duration—low as possible or 0
Boost Duration – 180 minutes
Battle Born is a terrific company to work with -- they are knowledgeable, very nice and quick to help. I spent a little extra to get Battle Borns, but I'm glad I did. Well worth the money. Maybe these settings will help someone else -- I suspect they are good for any Tracer with a 12v system. vw
Over Voltage Disconnect – 14.7V
Charging Limit Voltage -- 14.7V
Over Voltage Reconnect Voltage -- 14.6V
Equalize Charging Voltage -- 14.6V
Boost Charging Voltage – 14.6V
Float Charging Voltage – 13.6V
Boost Reconnect Charging Voltage 13.2V (this is the voltage that will trigger the boost mode to kick in. 13.2V is ~70%, raise this if you don’t want them to get that low before recharging, do not set below 12.5V [14%])
Low Voltage Reconnect Voltage – 11V
Under Voltage Warning Reconnect Voltage -- 12.4V
Under Voltage Warning Voltage -- 12.3V
Low Voltage Disconnect Voltage – 12.1V
Discharging Limit Voltage – 11.5V
Equalize Duration—low as possible or 0
Boost Duration – 180 minutes