The water tank reservoir for my car's wipers is leaking. Turns out replacing it is an ordeal (e.g., the front bumper and other junk all has to come off).
Long shot... but figured I'd ask if anyone knows of a miracle fix. It's buried pretty far in there, can barely see any of it from the top.
I was afraid that it would plug the pump.Drop a bit of "stop leak" in there....
Nidage | Rumia | Takmly | Brave669 |
---|---|---|---|
$32 6.2 mm diameter 4.92 ft 1080p @ 30fps 1.2-8 inches (3-20 cm) variable light brightness 450 mAh Battery | $30 8mm diameter 16.5 ft 5 MP (2560x1920) 4-8 CM focus 3 light settings 2600 mAH, 4 hr battery | $22 5.5 mm 16.4 ft 1280x720 1.2-4" (3-10 cm) focus variable light brightness uses device Battery (YouTube review) | $7 7 mm 1 or 3m ($8) 1280x720@30 fps 3cm - 6cm focus variable light brightness uses device Battery |
Interesting idea! I like it, not sure how I'd do it... (shop vac & duct tape?)If you could apply some vacuum to that i wonder if you’d see air bubbles in the smurf stomach?
I liked this idea so much thought I'd try it. Possibly combining it with @pollenface 's idea in reverse (spray some sort of stop-leak on the outside and let it get sucked into the tank).If you could apply some vacuum to that i wonder if you’d see air bubbles in the smurf stomach?