Venus OS USB to Serial config on Raspberry Pi

[mendiola_loyola]

Hello,

I have installed Venus OS on a Raspberry pi.
Should I setup the baud rate of the virtual serial port to 19200 on the Raspberry Pi?
I'm using a ftdi usb to ttl converter.
On windows I have to set the ftdi baud rate to 19200, Do I have to do the same on raspberry to allow Venus OS to find my victron devices connected to the FTDI usb to serial converter?

Regards
Alfredo Mendiola
Lima, Peru

 

[Dynoman]

Hello,

I have installed Venus OS on a Raspberry pi.
Should I setup the baud rate of the virtual serial port to 19200 on the Raspberry Pi?
I'm using a ftdi usb to ttl converter.
On windows I have to set the ftdi baud rate to 19200, Do I have to do the same on raspberry to allow Venus OS to find my victron devices connected to the FTDI usb to serial converter?

Regards
Alfredo Mendiola
Lima, Peru

Followed Andy's video a few years ago and to set up Venus OS on a Raspberry Pi. been working well for several years.

Later updated the Venus OS on Raspberry Pi following another of Andy's video.

 

[740GLE]

I wasn’t aware anything special was needed for USB to ve.direct comms outside needing converters