Victron SCC advice for 1000W of solar

[ericwc]

Planning on running 10 100W HQST panels on my trailer. 2S5P I think that is the right abbreviation. Going to pair up the panels in series and then parallel the 5 pairs. Based on the Victron spec sheets it seems like the Smart Solar MPPT 150/70 should work but a using an online calculator it recommends the Smart Solar MPPT 150/100 Any advice on if I need to oversize the SCC as the calculator indicates or is there enough flexibility built into the 150/70 to be ok?
Thanks!

 

[rhino]

Did you use Victron's calculator? Should confirm my numbers but it says the 150/70 is fine: https://mppt.victronenergy.com/?loc...wLjA1LDUuODYsMTAwLDE4LjYsLTAuMzMsMjIuMywxMCw2

 

[ericwc]

Did you use Victron's calculator? Should confirm my numbers but it says the 150/70 is fine: https://mppt.victronenergy.com/?loc...wLjA1LDUuODYsMTAwLDE4LjYsLTAuMzMsMjIuMywxMCw2

I had not found their calculator THANKS!