• Have you tried out dark mode?! Scroll to the bottom of any page to find a sun or moon icon to turn dark mode on or off!

diy solar

diy solar

Victron SCCs and temp sensors displaying in VRM seems odd

WorldwideDave

Solar Addict
Joined
Mar 5, 2024
Messages
1,712
Location
90266
TLDR: I would like the temp battery V box to not appear, but remain under the 'battery' section in VRM (sensor connected to Cerbo GX).

I figured out how in the DVCC and I/O setup to configure the temp sensor to be a 'battery' temp sensor connected to my cerbo GX. That's cool - it shows up the same place it did when I had it connected to the shunt originally. Neat. However now I cannot seem to get rid of the temp battery V box in the lower right (V = victron; R = Ruuvi). The box showing 22.0 degrees C I would not think would be visible in VRM default dashboard given that it is now visible in the battery box itself? Although it is interesting that it hit 39.0 C max today during my testing.

1739600654619.png

For those who are interested, solar in the last 30 days has been strange at best. Cloudy and rainy.

1739600872468.png
 
Interesting I still have not figured this out.
In short, when using a battery monitor product with the temperature sensor connected to it like BVM-712 by Victron OR the temp sensor that is on a multiplus or quattro device, the temp will appear under the battery itself, not as a separate box. That is what I was seeking.
 

diy solar

diy solar
Back
Top