I have my BMS all setup and ready to go. It's 8s 24v diy pack with the standard 280ah cells. I have been testing it inside before installing it in my bus. I just get around to putting on the charge controller. Imagine my surprise when the charge only read 14/15v? I have 30v going into the charge controller (just a regular power supply for testing). When I check the voltages from the main positive to the main negative I get 26.5v. when I go to the charge controller side of the BMS to the main positive I get 14?
I'm currently waiting on the data cable for my charge controller to show up so I can edit the settings more in depth. It must be that it's currently set to a 12v mode and it's only allowing 14v to flow to the BMS? Just wanted to check as I feel like I'm going nuts.
I'm currently waiting on the data cable for my charge controller to show up so I can edit the settings more in depth. It must be that it's currently set to a 12v mode and it's only allowing 14v to flow to the BMS? Just wanted to check as I feel like I'm going nuts.