thecampulanceman
New Member
- Joined
- Aug 12, 2020
- Messages
- 11
I hope someone can lend a hand - I installed my system last November on to my truck. I have 6 Rich Solar 190w panels. 3 in series, 3 in series, then those 2 sets wired in parallel on to a 12v Epever Tracer 10420AN 100amp controller and 3x Renogy 100Ah 12v Gel batteries. The panels are:
Rich Solar 190w panels RS-M190
Maximum Power(Pmax): 190W
Maximum Power Voltage(Vmp): 20.4V
Maximum Power Current(Imp): 9.31A
Open Circuit Voltage(Voc): 24.3V
Short Circuit Current(Isc): 9.86A
Maximum System Voltage(Vmax): 1000VDC
When I look at my PV output I'm not seeing higher than 550ish (max) watts during full sun straight above. My concern is that I have a panel or panel wiring problem. Based on my series/parallel wiring, can anyone tell me what the (max) output should be (V, Amp, Watt)? I'm embarrassed to say that I don't know how to calculate that info...
Rich Solar 190w panels RS-M190
Maximum Power(Pmax): 190W
Maximum Power Voltage(Vmp): 20.4V
Maximum Power Current(Imp): 9.31A
Open Circuit Voltage(Voc): 24.3V
Short Circuit Current(Isc): 9.86A
Maximum System Voltage(Vmax): 1000VDC
When I look at my PV output I'm not seeing higher than 550ish (max) watts during full sun straight above. My concern is that I have a panel or panel wiring problem. Based on my series/parallel wiring, can anyone tell me what the (max) output should be (V, Amp, Watt)? I'm embarrassed to say that I don't know how to calculate that info...