Why does Will Prowse suggest not using load output ports on the EPEVER MPPT Solar Charge Controller?

[MrNatural22]

Simple explanation,
1. MPPT load output terminals get power from the battery only. Whatever your battery has is what will be showing at load terminals.
2. Not from panels.
3. Controller fails or disconnects or blows its fuse there will no longer be any power from the load terminals.
4. Or power to the battery from panels.
5. Use of load terminals is limited and is recommended only for low power use. ( low power led lights, etc etc)

 

[MrNatural22]

…

 

[Impatient]

Thanks MrNatural. Is my scheme likely to blow the Victron MPPT? It seems like you are saying my loads would be safe.