Wrapping the Tools that Work in the Battery Box

[MrM1]

I had a few little extra pieces of shrink wrap so I decided to wrap the tools that I commonly use around the Lifepo4 cells and terminals.

• Large heat shrink on the sockets
• A piece of heat shrink on the metal section of the torque driver
• And a composite ratchet round out my safety pieces

I used a paint marker to re mark the sockets, and honestly the markings were so old (think 43 years) that I could hardly read the sizes anymore.

Anyways, I like it!
It feels like 1 more lay of security.

 

[sunshine_eggo]

I had a few little extra pieces of shrink wrap so I decided to wrap the tools that I commonly use around the Lifepo4 cells and terminals.

• Large heat shrink on the sockets
• A piece of heat shrink on the metal section of the torque driver
• And a composite ratchet round out my safety pieces

I used a paint marker to re mark the sockets, and honestly the markings were so old (think 43 years) that I could hardly read the sizes anymore.

Yeah. I blame that too. Has nothing to do with my eyes. Not a thing.

 

[MrM1]

Yeah. I blame that too. Has nothing to do with my eyes. Not a thing.

OH no, my eyes suck, but the marks are definitely worn from age