WTB copper flat bar and a plate for bus bars

[falgsc-al]

Looking for some copper flat stock to use for bus bars. Can go up to 3" wide, up to 1/4 thick (atleast 1/8) , need 6 pieces 21" length and 2 12". Can cut and drill etc just need that much to do the job.

Also need a plate, at least 1/8 upto 1/4, 4" x 10".

Does not have to be new and IDC what you carve it out of pending its not toxic or illega to handle and ship.

 

[rmaddy]

I've purchased copper bar stock from onlinemetals.com in the past for making bus bars. They sell bar stock in various thicknesses (including 1/8", 3/16", and 1/4") and various widths. They will cut to custom length or you can buy stock lengths (usually a little cheaper that way).