diy solar

diy solar

Xiaoxiang BMS factory settings on a 12V 150Ah LiFePO4 - how to verify all is good?

Mako74

New Member
Joined
Oct 20, 2020
Messages
44
Hi guys. I've purchased a pair of Bely 12V 150AH LiFePO4 battery with Bluetooth, low temp cut-off and internal heating. I've connected to the BMS via the Xiaoxiang app and this is how the factory settings are. I will be installing two of these batteries parallel to my camper van as household batteries and they'll be connected to a set of Victron components such as Multiplus 12/2000, OrionTR 12/12-30A and 100/50 MPPT feeding 600W of solar. Peak discharge will come from a 1600Wp induction cooker. Portion of the usage will be in sub-zero temperatures (this is why I went for this particular battery with internal heating).

My questions is, how can I verify these settings are good to go for my planned use of the batteries? I'd rather be safe than sorry so is there some parameters here I should adjust for system longevity?

Many thanks in advance!

Screenshot_20210306-182011_xiaoxiang.jpg
Screenshot_20210306-182023_xiaoxiang.jpg
Screenshot_20210306-182036_xiaoxiang.jpg
Screenshot_20210306-182050_xiaoxiang.jpg
Screenshot_20210306-182105_xiaoxiang.jpg
 
Ik heb dezelfde Bely LifePo4 150 Ah besteld voor gebruik in de camper als huishoudaccu. Ik verwachtte deze eind april. Ik ben zeer benieuwd naar de eerste ervaringen en eventuele aanpassingen / correcties van de fabrieksinstellingen.
 
Back
Top