Most reacted posts

Gotcha thanks for the reply. I am planning on running 1/0 to the back of the truck red and black. 40 amp dc-to-dc charger. I was just curious if there was anyone that's use the chassis as a ground.

My fith wheel came generator prep the transfer switch already installed. I am wondering can I just pull out the transfer switch out and run 6/4 Romex Wire on the incoming shore power side where the transfer switch was uusing lug blocks or Polaris Multitap Connectors to add 15 feet of 6/4 to the...

Going to be adding a dc-to-dc charger in my 5th wheel. Running either 2 gauge or might go 1/0. Question is instead of running a red and black continuous from the engine compartment to the back of the truck with a Anderson connector. Has anyone had any good or bad experiences running the negative...

I have a question actually wanted make sure I am using the right size wire. Going have 6 Hightec 215w solar panels. 3 in series and 3 in parallel. The VMP 20.72V and the IMP 10.41A. The parallel string I figured 20.72V and 31.23A. The series string I figured 62.16V and 10.41A. Total 82.88V and...

Thanks for the input. I was thinking of using Polaris connectors for all the wires in a box and then periodically check the tightness of the connectors. They have a plug u pull off torque down .

My fith wheel came generator prep the transfer switch already installed. I am wondering can I just pull out the transfer switch out and run 6/4 Romex Wire on the incoming shore power side where the transfer switch was uusing lug blocks or Polaris Multitap Connectors to add 15 feet of 6/4 to the...