Haze

I have a quick question about this. Do you add the class T fuse length together with the positive cable to get your total length ? Or is...

I know how the AIO's work to an extent. The EG4's(6500s) are easy plug and play and anyone can hook them up with a very basic...

Thanks for pointing that out, I’m currently thinking of the best way to manage the system while I’m away to use least amount of battery...

Dont forget, this isn't something that you need to run 24/7. You only technically need to have the BMS see current once in any 24hr...

So to try and clean up my thread…. I originally started this thread with 1 router and 1 modem tied to my multi. This setup pulled...

I’m now running with a fan and light to try and stay above the limits Dexter mentioned. Originally I was running well below these limits...

I have a generator I can run to recharge the batteries currently. I will get the solar panels installed within the next month and that...

This makes sense. @HighTechLab said the cutoff for current reading is .7a, and ive seen some in the .8-.9a range (Other brands though)...

This is with modem, router, one ceiling light and a high speed floor fan running. SOC might not be correct since I haven’t charged...

With my victron 5k multi plus and our internet running i believe it was drawing 14 watts continuous. I will see around 21 watts once in...

Seems like a weird feature. Frankly that should be able to be turned off from the battery itself, IMO.

Every thing seemed fine when I charge them with the generator today. thanks for this info, I was confused on what I needed to do but it...

Cell voltage looked fine from the displays, it is purely just going into power save mode. Hopefully soktools will expose a setting you...

No my wife is the only one who can mess with computer stuff and she is out of the country at the moment but hopefully early next week...

There is no blinking and I have to push the reset to get the system to turn back on. Now that I have seen it do it with each battery...

That's why I was asking cell voltages; there are two levels of power save mode. If the cells are under 3.15v it goes into power save...

I was at the cabin today and the other battery shut off on us. So the internet and modem pulling around 15 watts isn’t enough to keep...

Not yet. My wife is planning to go up to our place this weekend, so hopefully will be able to get the info then.

Following. Hope you get it worked out.

So system is running fine on one battery, not sure how to fix the other battery or why it cause the system to shut down when I put it in...