Sounds complicated Hope you get it fixed, I'm still having issues with battery not draining fully stopping at 14kw, I've ordered a REC BMS but coming from Germany. Has anyone got any experience with Solis Inverter and REC BMS?
Hi Everyone
I've been building a large pack out of 5 growatt batteries, I have reconfigured all the batteries to 5 in Parallel and 14 in Series, I've connected it to a Seplos BMS, I've got this connected to a Solis 5G Inverter the CAN communication is Working.
Issue I'm facing is that the BMS...
Hi Everyone
I have five Growatt GBLI 5001 that i want to connect together to make one big battery of 24kw, all batteries are working and charging. i think i need to remove the current BMS and install another.
I have a 6kw Solis 5g Hybrid Inverter that i would like to use
what BMS would...
I have little to no voltage on Seplos bms, checking with a multimeter after adding additional cables im getting 50.44v, I've checked all wires to Seplos BMS are in the correct place but still nothing.
update I have fixed my batteries, I have made two small packs of 3 in Parallel and 14 in series and Now have two BMS making a total of 30 Kw, The JK BMS works very well at balancing the batteries, Now the issue im facing is the inverter can't charge within the 4 hour off peak time, I am looking...
Still having issues with the batteries not using full capacity, I've reduced the pack size to 15kw with only the best batteries that are all balanced with each other but it still only using 10kw.
Hi Tim
I bought a Seplos BMS, I have read on other forum that a guy has used it with the Pylontech configuration on Solis Inverter, I am still building my battery need to reconfigure the batteries to 5 modules in Parallel and then into series.
I really need some help reconfiguring them to get...
Got my REC BMS all settup up but having an issue that the SOC drops suddenly for example it's 50% then drops to 3% and then inverter starts charging again.