Most reacted posts

I have a number of 24v and 12v LiFePo4 batteries that I use to charge my Ecoflow power stations. This is a simple home backup system. If the power goes out and I can't charge via the wall outlet, I use the XT60i cable from the battery into the Ecoflow's solar part and recharge the power...

Thank you very much Andrewr05!!!

KnobCountry, so you're saying to charge the Ecoflows from the load output (My Victron has that) and the batteries from the battery terminals? I have XT60i pigtails on all my batteries? All I've ever read about the load outputs on Solar Charge controllers were they are for a muffin fan or led...

Delta 2 has a 500w, max 60v 15a input. Victron solar charge controller is 100v, 15 amps. I have 2 200w solar panels with 36.4 Voc and 6.6A Isc specs. If I tell the Victron SCC that the Ecoflow is a 24v battery, can I use that to charge the Ecoflow Delta 2? Otherwise, I have to physically...

I appreciate the responses. What I'm hoping to do is set up a charging station that I can bring each device to (I have multiple Ecoflows and multiple 12 and 24v batteries). So downstream of the Victron SCC, I would be connecting an Ecoflow, charge that, connect another Ecoflow or a LiFePo4...

I'm hoping to set up a simple battery charger for my LifePO4 batteries. I'm charging 1 battery at a time. I have both 12v and 24v 100AH. I have a Victron 75 15 (12/24v) charger and 2 BougeRV N-Type 200w solar panels. The solar panels are 36.4v VOC and 6.3imp (amps). I know I can't wire the...

Thank you everyone for the helpful answers. I have multiple batteries, so the plan is to connect one in the morning, let it charge all day, and then remove it and connect one the next morning. The Victron is supposed to be able to sense whether a 12 or 24v battery is connected. I have...