Most reacted threads

In the process of adding a 2nd midnight 200 charge controller to a pre-wired Schneider sw4048 currently running a single midnight 200 purchased from a reputable on-line seller. My question - when they sent me the 2nd charge controller, I also asked for 2 more breakers. Instead of sending me 2...

Looking to understand how to set up charge controller - DIY Battery: LF280K - 16 cell configured for 48V system with Overkill BMS - 18650 Grade A cells Charge Controllers - 2 Midnight Classic 200's - both running 2 strings of 6 panels rated at 380w each panel (12 panels x 380 = 4,560 watts)...

Looking to understand how to set up charge controller - DIY Battery: LF280K - 16 cell configured for 48V system with Overkill BMS - 18650 Grade A cells Charge Controllers - 2 Midnight Classic 200's - both running 2 strings of 6 panels rated at 380w each panel (12 panels x 380 = 4,560 watts)...

Looking for a BMS to use with a SW4048 and EVE LF280K batteries - hoping given this is a common inverter type that someone has crossed this bridge already. 48V system - figure around 250-300 amp. I am not overly techy & new to LiFePO4 - would be grateful for some steering in the right direction...

Schneider SW4048 a/c output voltage too high - around 128-129 vac. Triggering random warnings that exceed the default 135 vac setting when a larger load is applied (microwave). I can't find any way to adjust the voltage output on the inverter down. Past threads here asking about it without...

Have a Schneider 4048 and midnight Solar charge controllers. Looking at building another system using one of the Victron inverters that are integrated with the charge controller and running off of a diy build lf280k cells, using a harbor freight quiet 9500 for gen power & 4k of panels. Anyone...