Most reacted posts

Hi Thought I would share my experience getting a Solis storage inverter working. I read a lot of posts here of people having issues with Solis inverters and thought I would share this in case it helps anyone. My setup Solis RAI-3K-48ES-5G inverter (obviously) 48v 100ah battery with PaceBMS 10...

Thanks for the reply but still nothing, I have tried that version of BMS tools and ever other I can find

Hi I’m having a problem with my Solis RAI battery inverter since we lost power for a week. The I have separate battery and solar panel inverters, the Solis is set to charge the battery at night off peak then discharge in the day. The solar inverter feeds to the house circuit, power meters are on...

Hey, I have a Anenji battery pack. It's a 51.2V100AH battery. It has a Pace BMS but I cannot get any reliable communications with it. The seller sent me a BMS Tools v2.04 which they say should be able to talk to the battery. I'm getting nowhere. I have 3 RS232 cables, 1 from Amazon, 1 from the...

The battery is charging to 100% overnight. When there is surplus solar in the day the battery is usually about 70-80%. There’s no alarms or warnings and lights on the battery are green

I’ve tried a Solis and Voltronic inverter. Tried connecting to the rs485 and Can port. I had some success with rs232, flipped the rx/tx wires and used MJDB tools v2.7 it could read some information but not the CAN or rs485 protocols

Hi, did you ever get this working? I have the same inverter and meter wired up the same it cannot communicate over RS485.

I will look at this over the weekend. Spent all day talking to Solis customer support getting the energy meter working

Hey there, I’m using a generic brand LifePO4 48v 100ah battery pack connect to a Solid inverter. It has a Pace BMS and I’m using it in lead acid mode right now as the BMS can’t talk to the inverter. I’m not asking about how to get comms working but about this status on the battery display...