Most reacted posts

Going to buy 3 panels at 300 watts each. Will be buying 2 Chin 300 watt Lipo batteries in parallel. Would like to run them all in parallel if possible do to some shading during the day. I will be using a 3000 watt pure sine wave inverter with this srtup. I am considering a Victron MPPT...

I have two Weize 100 ah Lipo 4 batteries that my 6 120 watts panels charge. I am wanting to add more battery capacity. These 2 batteries are about 6 months old and I have them wired in parallel as I do my panels. I would like to go from a 200-amp system to a 400-amp system. Can I try to find the...

I have tried 2 new epever controllers with the same result. I also occluded a pic of my measurements going into my controller also. I am currently charging my batteries with a lipo4 charger every couple of days since the controller is failing yo do so. I thought it might be the BMS in each Weize...

It is set for user since this epever does not show litium

I have 6 Bourgerv 120-watt panels going to an Epever 60 amp controller. I have this connected to two Weize 100 ah Lipo4 12 volt lithium batteries. The batteries are hooked up to a 2000 watt pure sine wave inverter. I use this to run 2 small chest deep freezers and a refrigerator for about 6...

You have to set it for user on the controller remote but you can set the battery to lipo4 on the computer connection.

Thank you for the comment. I am going to try and keep things at 12 volts to go along with my two other small system's.