Hello,
I have a SUN-8K-SG01LP1-EU
with current software version:
Information Protocol Version:V0.2.0.1 MAIN: 6014-0717
HIM: 0000-C35A
Lithium Battery Version Number : V0.0.0.0
Type of LCD screen: 8100
- Every morning, around 4:00 a.m 5:00 a.m. there is an error which blocks the inverter in...
Here are some pictures for the setting and wiring of the meter ACREL ACR10R:
https://photos.app.goo.gl/5vNDGv9dzGjkeB3i6
If the Solis is counting backwards, you have either positioned the clamp in the wrong direction.
Or, what happened to me is that the original meter delivered with the Solis...
Screens of my Solis, here:
https://photos.app.goo.gl/oX7YasDxwGBYnAfn7
And yes, step 1:
Battery:user definie
Step 2
Battery plomb acide
Normally is same on my Solis and BMS Seplos
Hi,
With the Solis in firmware version:
350025.F6
It is not fully compatible by going directly through the "PYLONTECH" brand mode of the Solis.
I have in my installation two BMS in series, one cuts the positive and the other the negative DC battery
It is necessary to make believe in the Solis...
Hello, the bms seplos is connected via bus can and synchro OK (automatically recognized) via the battery profile ;
User defined
However, it seems that Solis will soon make changes that could make this profile disappear!
If this is the case, I say IF I could not use this BMS :(
To see in a few...
Hello,
I use a BMS card (sold "naked" without box).
https://www.seplos.com/supplier-461674-seplos-smart-bms
Model 100A 16s
Paid in total with rs485 adapter for PC monitoring software and fees and taxes, shipping about 230$.
(contact me vi MP for details)
Regrads.
Hello,
I am equipped with the Solis inverter RHI-6K-48ES-5G
I was using a BMS non bus can before with the profile "lead acid" of Solis with a battery LifePo4 "free" "no name "16S 280ah X2 or 560ah in total in 48V.
There was serious dysfunction of charge and discharge in these conditions...