Hello, I have a Growatt 3000 24v. When I first set up the system with batterys and ac in, I had ac out to my power strip.
Then today I finally had a chance to hook up a 200w 24v rich solar panel. The unit showed that it was charging via solar
giving me 36v. So then I turned on the power strip...
Thanks for the reply. No one ever chimed in so I just went ahead and bought it. And it worked fine. I guess sometimes you
just have to do that and give it a try LOL!
The line going in to the modem is ac straight to the wall. So no there is no wall wort. It would have been nice if there was. So Im waiting for my kill a watt to come in then I can really see what the power usage is.
Thanks for the reply. My router/modem is AC so I have no idea how to make that run on DC. I am getting a Kill a Watt meter so I can see what wattage it really is using. Im a noob LOL! Now the journey begins!!
When its plugged in to shore power the inverter light stays solid. When I unplug from shore the ac light
flashes. Thats about all all it says. But the inverter is on either way. As long as there is battery or solar.
I hope this helps.
Im considering using a Bluetti AC50s to power my Modem/Router combo 24/7. I would also
have it hooked up to 2 100 watt panels. The power in my area goes out frequently. This
unit would only power the modem/router, nothing else ever. The only info on my modem
is that it is 120V and 1 amp. What...
Cannot visually inspect relay but it does switch over, I can hear it. The only thing I can think of is, I must have a setting wrong.
There is a big menu with lots of parameters to change. I must have something set to low or to high
Pic of my setup....
I have a Jackery 500 and I bought a Rich Solar 100w portable solar panel. The panel has Anderson connectors.
I know that the Jackery has a 8mm input. Im trying to figure out what 8mm to anderson connector assembly
to purchase so I can use my Rich solar panel. Im thinking of this from amazon...